Balance à haute résolution HY10.32.HRP

Balance à haute résolution HY10.32.HRP - Radwag Les Balances Electroniquesview:1

Code produit: WP-330-0009
Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.
CE
Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.
Poser des questions sur le produit

Description

Capacité maximale [Max]: 32kg

Précision de lecture: 0,1g


La série de balances de haute résolution HY10.HRP est une solution idéale pour toutes les branches de l’industrie. Les balances industrielles de haute résolution assurent des hautes précisions de mesures et des répétabilités de résultats même dans des conditions industrielles difficiles.

La sécurité de données et l’archivage de résultats du travail sont garantis par les logiciels de terminaux RADWAG.

Media

Fonctions

Dosing

Dosing

Radwag Dosing
Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
Labelling

Labelling

Radwag Labelling
Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
Plus/Minus Control

Plus/Minus Control

Radwag Plus/Minus Control
Plus/Minus Control
Percent Weighing

Percent Weighing

Radwag Percent Weighing
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Totalizing

Totalizing

Radwag Totalizing
Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
Parts counting

Parts counting

Radwag Parts counting
Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Peak hold

Peak hold

Radwag Peak hold
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
Formulation

Formulation

Radwag Formulation
Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.
Newton unit measurement

Newton unit measurement

Radwag Newton unit measurement
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
Statistics

Statistics

Radwag Statistics
Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
Checkweighing

Checkweighing

Radwag Checkweighing
Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
GLP Procedures

GLP Procedures

Radwag GLP Procedures
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
Animal weighing

Animal weighing

Radwag Animal weighing
Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimaze the function depending on the measured product characteristics.
Differential weighing

Differential weighing

Radwag Differential weighing
Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.<br />
Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.
Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.
Replaceable unit

Replaceable unit

Radwag Replaceable unit
Statistical Quality Control

Statistical Quality Control

Radwag Statistical Quality Control
ALIBI Memory

ALIBI Memory

Radwag ALIBI Memory
The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period.
Transactions

Transactions

Radwag Transactions

Paramètres Techniques

Capacité maximale [Max] 32 kg
Capacité minimale [Min] 5 g
Précision de lecture 0,1 g
Dimension du plateau 360×280 mm
Étendue de tare -32 kg
Répétabilité 0,1 g
Linéarité ±0,3 g
Temps de stabilisation 2 s
Dérive de sensibilité 2 ppm/°C dans la température +10° ÷ +40 °C 
Température du travail +10° ÷ +40°C 
Alimentation 100 ÷ 240 V AC 50 ÷ 60 Hz 
Afficheur 10,1" panoramique en couleurs 1024×600 
Degré de protection IP 66/67 construction, IP 68/69 terminal 
Humidité relative d'air 40% ÷ 80% 
Ajustage interne 
Masse nette 24,7 kg
Masse brute 28,7 kg
Entrées/ sorties 4 entrées / 4 sorties 
Ethernet ×1 
USB ×2 
RS 232 ×2 
Capacité préliminaire 4 kg
Powtarzalność - jest wyrażona jako odchylenie standardowe z 10-ciu postawień obciążenia
Wilgotność względna powietrza - warunki niekondensujące
Czas stabilizacji - w optymalnych warunkach otoczenia

Documentation

Documentation technique

Mode d'emploi Platforma HRP
1.46 MB FR

see the publication

Mode d'emploi Terminal HY10
4.02 MB FR

see the publication

Fiche technique
1.12 MB FR

see the publication
Publications et Matériaux Pédagogiques

Accessoires

R-LAB
MWMH-Manager

Accessoires

Nom De Produit

Description

MWMH-Manager

MWMH-Manager

...

Pilote LabVIEW
RADWAG Remote Desktop

Accessoires

Nom De Produit

Description

RADWAG Remote Desktop

RADWAG Remote Desktop

...

Imprimantes d'étiquettes
Câbles d'Entrées/ de Sorties
Câbles de réseau (balance – Ethernet)
Câble USB (balance – imprimante Epson)
Câbles RS 232 (balance – ordinateur)
Câbles RS 232 (balance – imprimante Epson)
Claviers, manipulateurs
Lecteurs de code-barres
Afficheurs
Radwag Les Balances Electroniques
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
® 2018 RADWAG Balances Électroniques. Tous les droits sont réservés.

See our movies
RADWAG