Balance de précision WLC 12/F1/R

Code produit: WL-206-0076

Il symbolise la conformité d’un produit avec les régularisations de l’Union Européenne. Le marquage CE sur le produit présente la conformité d’un produit avec d’autres règlements de sécurité déterminés par les directives du marquage CE.

2 ans de garantie

Poser des questions sur le produit

Fonctions

Plus/Minus Control

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Newton unit measurement

Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimaze the function depending on the measured product characteristics.

La balance de précision WLC 1/A2 est conçue pour l’indication rapide et précisive de masse dans les conditions laboratoires et industrielles. Elle peut aussi être utilisée aux lieux privés d’accès au réseau secteur (230V) parce qu’elle est équipée d’un accumulateur interne et de l’interface RS 232. La balance de précision WLC 1/A2 possède le plateau en acier inoxydable et l’afficheur rétroéclairé LCD qui garantit une bonne lisibilité des résultats. La balance de précision WLC 1/A2 possède la possibilité de pesage sous balance – une charge est suspendue sous balance. C’est une alternative pour des charges de dimensions et de formes non standardisées et produisant un champ magnétique.

Capacité maximale [Max]	12 kg
Précision de lecture	0,2 g
Dimension du plateau	300×300 mm
Étendue de tare	-12 kg
Répétabilité	0,2 g
Linéarité	±0,6 g
Temps de stabilisation	3 s
Température du travail	+15 - +30 °C
Alimentation	100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC + accumulateur
Afficheur	LCD (rétro-éclairé)
Communication interface	RS 232
Masse	5,2/6 kg
Dimensions de colis	570×390×170 mm
Degré de protection	IP 43
Temps de travail avec l'alimentation d'accumulateur	35 heures (temps moyen)
Humidité relative d'air	10÷85% RH sans condensation
Ajustage	externe