WTC 600.1 Precision Balance

WTC 600.1 Precision Balance view:1

Product code: WL-210-0008
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
2 years warranty
Request for quotation

Overview

Maximum capacity [Max]: 600g

Readability [d]: 0,01g


WTC series precision balance is designed for fast and precise mass determination of weighed loads in laboratory conditions.

The WTC series is easily used in areas with no access to mains (230V) as it comes standard with an internal rechargeable battery.

The balance is equipped with stainless steel weighing pan, RS 232, USB-A, USB-B, output and backlit LCD display.

Functions

Plus/Minus Control

Plus/Minus Control

Radwag Plus/Minus Control
Plus/Minus Control
Percent Weighing

Percent Weighing

Radwag Percent Weighing
Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.
Parts counting

Parts counting

Radwag Parts counting
Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
Newton unit measurement

Newton unit measurement

Radwag Newton unit measurement
Function allowing to perform the measurement in Newton unit, it may be used for processes aiming to determine force resulting in the sample damage.
GLP Procedures

GLP Procedures

Radwag GLP Procedures
Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
ALIBI Memory

ALIBI Memory

Radwag ALIBI Memory
The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period.

Datasheet

Maximum capacity [Max] 600 g
Readability [d] 0,01 g
Weighing pan dimensions 128×128 mm
Tare range -600 g
Repeatability 0,01 g
Linearity ±0,02 g
Stabilization time 2 s
Operating temperature +15 - +30 °C
Power supply 100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC and battery 
Display LCD (backlit) 
Communication interface 1×RS 232, USB-A, USB-B 
Weight 1,3/2 kg
Packaging dimensions 330×230×140 mm
IP rating IP 43 
Operation time on batteries 33 h (average time) 
Adjustment external 

Documentation

Technical Documentation

User Manual
1.04 MB EN

see the publication

Data Sheet
0.82 MB EN

see the publication

Conformity Declaration
0.03 MB EN

see the publication

Download

Drivers

RADWAG USB DRIVER 1.6.2 (1.25 MB)

Accessories

R-LAB
LabVIEW Driver
Receipt printer
Dust-free cabinets for printers
RS 232 cables (scale - Epson printer)
RS 232 cables (scale - computer)
Cigarette lighter receptacle power supply cables
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
® 2018 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG