PUE C/31H/Z Indicator

PUE C/31H/Z Indicator view:1

Product code: WX-008-0003
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market.  The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
2 years warranty
Request for quotation

Overview

Functions of an indicator PUE C/31H series:

  • measuring units: [g], [kg], [N], [ct], [lb];
  • tarring in whole measuring range;
  • automatic tare, tare memory;
  • parts counting with equal part mass;
  • +/- control of mass with set standard;
  • percent setup with set standard;
  • averaging of weighing result, digital filter;
  • control of power supply from batteries;
  • scale timer switch off;
  • adjustable backlight on powering by batteries;
  • adjustable baud rate between 1200-38400 bit/s;
  • continuous data transmission through RS 232;
  • manual or automatic mode for RS 232;
  • weighing loads with switched off autozero function;
  • measurement of maximum force or maximum mass placed on weighing pan;
  • measurement of force influencing the weighing pan (in Newtons);
  • start mass control;
  • slot for connecting an additional LCD display;
  • totalizing mode.

The indicator PUE C31 series enables designing printouts according to individual needs.

Datasheet

Operating temperature -10 ÷ +40 °C
Power supply 100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC and battery 
Display LCD (backlit) 
Communication interface RS 232 
Packaging dimensions 300×250×140 mm
IP rating IP 68 (1h max)/69 
Operation time on batteries 45 h (average time) 
Atmospheric humidity 10÷85% RH no condensation 
Net weight/gross weight 3,5/3,8 kg
Keyboard microswitch 
Maximum quantity of verification units 6000 e 
Number of buttons
Maximum quantity of divisions from converter 838 860 ×10 
Maximum increase of signal 19,2 mV 
Maximum voltage per verification unit 3,2 µV 
Minimum volatge per verification unit 1,0 µV 
Minimum load cell impedance 80 Ω 
Maximum load cell impedance 1200 Ω 
Connection of load cells 4 or 6 wires + shield 
Multiple range 1 or 2 ranges 
Load cell excitation voltage 5V DC 
Additional LCD display LCD (option) 
Housing stainless steel 
Optional power supply 10-18V DC Imax=600mA 
Power supply odłączany zasilacz do ładowania akumulatora, wbudowany battery SLA 

Documentation

Technical Documentation

User Manual
1.46 MB EN

see the publication

Data Sheet
0.32 MB EN

see the publication

Conformity Declaration
0.03 MB EN

see the publication

Accessories

LabVIEW Driver
Receipt printer
RS 232 cables (scale - computer)
Cigarette lighter receptacle power supply cables
RS 232 cables (terminal - terminal)
AP2-3 Power loop output
RS232 – Ethernet Converter
Stands, wall mounting kits and mounting brackets
Displays
RS232 1339 Converter
Radwag Balances and Scales
Torunska 5
26-600 Radom
Poland
tel.: +48 48 386 63 03
e-mail: export@radwag.com
TIN: PL7960000327
Vimeo Radwag YouTube Radwag Facebook Radwag Google Plus Radwag
® 2018 RADWAG Balances and Scales. All rights reserved.

See our movies
RADWAG