PUE C/31H Indicator

PUE C/31H Indicator view:1

Product code: WX-008-0002
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market.  The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
CE
Information about conformity of a product with European Union regulations that concern the product. Marking the product with CE sign makes the manufacturer responsible for the product to meet requirements of general safety regulations determined by CE marking directives.
Verification
The procedure within the scope of Legal Metrology. It is performed by regional Offices of Measures or authorized entities before the new product is introduced to the market. The procedure is performed on the basis of tests validating conformity of a product with the directives. For most measuring devices, including balances and scales, this procedure has been replaced with declaration of conformity.
2 years warranty
Request for quotation

Overview

Functions of an indicator PUE C/31H series:

  • measuring units: [g], [kg], [N], [ct], [lb];
  • tarring in whole measuring range;
  • automatic tare, tare memory;
  • parts counting with equal part mass;
  • +/- control of mass with set standard;
  • percent setup with set standard;
  • averaging of weighing result, digital filter;
  • control of power supply from batteries;
  • scale timer switch off;
  • adjustable backlight on powering by batteries;
  • adjustable baud rate between 1200-38400 bit/s;
  • continuous data transmission through RS 232;
  • manual or automatic mode for RS 232;
  • weighing loads with switched off autozero function;
  • measurement of maximum force or maximum mass placed on weighing pan;
  • measurement of force influencing the weighing pan (in Newtons);
  • start mass control;
  • slot for connecting an additional LCD display;
  • totalizing mode.

The indicator PUE C31 series enables designing printouts according to individual needs.

Datasheet

Maximum quantity of verification units 6000 e 
Maximum quantity of divisions from converter 838 860 ×10 
Maximum load cell impedance 1200 Ω 
Minimum load cell impedance 80 Ω 
Maximum voltage per verification unit 3,2 µV 
Minimum volatge per verification unit 1,0 µV 
Connection of load cells 4 or 6 wires + shield 
Load cell excitation voltage 5V DC 
Maximum increase of signal 19,2 mV 
Display LCD (backlit) 
Additional LCD display LCD (option) 
Keyboard microswitch 
IP rating IP 68 (1h max)/69 
Housing stainless steel 
Power supply 100 ÷ 240 V AC 50 ÷ 60 Hz / 12 V DC and battery 
Operation time on batteries 45 h (average time) 
Operating temperature -10 ÷ +40 °C
Atmospheric humidity 10÷85% RH no condensation 
Net weight/gross weight 3,5/3,8 kg
Packaging dimensions 300×250×140 mm
Communication interface RS 232 
Multiple range 1 or 2 ranges 
Number of buttons
Power supply przewód sieciowy, battery SLA 

Documentation

Technical Documentation

User Manual
1.46 MB EN

see the publication

Data Sheet
0.18 MB EN

see the publication

Conformity Declaration
0.03 MB EN

see the publication

Accessories

Radwag Balances and Scales
Bracka 28
26-600 Radom
Poland
tel.: +48 48 384 88 00 ext. 205
fax: +48 48 385 00 10
e-mail: export@radwag.com
® 2017 RADWAG Balances and Scales. All rights reserved.
Radwag subscribe
Provide us with your
e-mail address in order to be sent
information on radwag.com news

See our movies
RADWAG